Kernel configuration

From PlcWiki

Revision as of 21:54, 6 February 2014 by Petr.zalabak (Talk | contribs)
Jump to: navigation, search

Contents

Kernel configuration file

The main configuration of the Kernel process is stored in the file /usr/local/plc/etc/plc_krnl_project.cfg.

Sending of backflush

The backflush data can be created either by the Kernel, or it can be prepared by a PMC data flow when the data are being received.

Kernel data

PMC data

# It is possible to backflush the product using the PMC dataflow. PMC will prepare the datafile                                                       
# in time when the data are received to Clever system and place it to the defined DirQueue. When                                                      
# the product assembly is finished, the Kernel crates the flag file and PMC DirQueue sends the                                                        
# datafile to JIS.                                                                                                                                    
#EndAssemPMCFlagDir = /usr/local/plc/var/pmc/backflushdirq                                                                                            
# The flag file can be created by a done operation as well.                                                                                           
DoneOperationPMCFlagDir.OC2 = /usr/local/plc/var/pmc/backflushdirq                                                                                    

PartDistribution.cfg

plan_project.cfg

Operation data scripts

It is possible to create bash scripts which are executed by special events. The location of these scripts is defined by the Kernel configuration parameter

OperationDataScriptsDir = "/usr/local/plc/bin/operation_data_scripts"

It is its default value.

Operation scripts

These scripts are executed when the operation sends its data to the kernel. The Client parameter

Operation.name.SendDataToKernel = Yes

is needed. The name of the script needs to be same like an operation ID (for example /usr/local/plc/bin/operation_data_scripts/AB3).

Workplace scripts

These scripts are executed when the product is completed on the workplace. Nothing is needed to specify in the Client configuration.

The name of the script needs to be same like a workplace ID (for example /usr/local/plc/bin/operation_data_scripts/AB).

Special events scripts

There are some special scripts, which are executed by following events:

Event Name of the script Note
Start of assembly START_OF_ASSEMBLY When the product ID is scanned first time on any workplace
End of assembly END_OF_ASSEMBLY When the assembly is finished. It means the product is either:
  • Completed on the workplace which ends the assembly
  • The following product(s) finished its assembly
  • The rework procedure had been commited and the following product(s) finished its assembly
Rework requested REWORK_REQUESTED When the code PLCSENDREW was used on any workplace
Rework finished REWORK_FINISHED When the rework procedure was committed on a rework station
Rework cancelled REWORK_CANCELLED When the code PLCRMREW was used on any workplace

If the script has a general feature, it is useful to use just a soft link named like the operation and it can point to the real script.

Personal tools