Rework procedure

From PlcWiki

Revision as of 16:06, 12 March 2012 by Petr.zalabak (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Generally a rework procedure can be done either on a dedicated Rework station or directly on an assembly line.

The product is marked as reworked using a control barcode "Send to rework (PLCSENDREW)". It is possible to remove the rework attribute using a barcode "Remove rework (PLCRMREW)".

There are several parameters in a client configuration file which define the behavior to the reworked products:


Second loop of reworked products

When during its assembly the cockpit is found to be reworked, it is marked using a barcode "Send to rework (PLCSENDREW)". Such a product is not deleted from the kernel data when it passes the final station and the product will go the second loop on an assembly line. It is not shown in the product sequence on the client screen, but when it is scanned on any workstation, it is automatically recognized as reworked. The following settings is needed to suppress the error message "Sequence error". Client version 1203091815 or higher is needed. 

WorkPlace.ReworkedProductOutOfSequence = No | Yes
Retrieved from "https://plcwiki.clever.cz/index.php/Rework_procedure"
Personal tools