Wifi on station
From PlcWiki
(Difference between revisions)
Jan (Talk | contribs)
(Created page with 'To bring station to wifi follow these steps: 1) create or update /etc/sysconfig/network-scripts/ifcfg-wlan0 ONBOOT=yes USERCTL=no PEERDNS=yes IPV6INIT=no DEVICE=wlan0 BOOTPROTO…')
Newer edit →
(Created page with 'To bring station to wifi follow these steps: 1) create or update /etc/sysconfig/network-scripts/ifcfg-wlan0 ONBOOT=yes USERCTL=no PEERDNS=yes IPV6INIT=no DEVICE=wlan0 BOOTPROTO…')
Newer edit →
Revision as of 01:18, 6 March 2010
To bring station to wifi follow these steps:
1) create or update /etc/sysconfig/network-scripts/ifcfg-wlan0
ONBOOT=yes USERCTL=no PEERDNS=yes IPV6INIT=no DEVICE=wlan0 BOOTPROTO=static BROADCAST=xx.xx.xx.xx NETMASK=255.255.255.0 IPADDR=xx.xx.xx.xx GATEWAY=xx.xx.xx.xx SEARCH="sas-automotive.com"
2) disable eth0, edit /etc/sysconfig/network-scripts/ifcfg-eth0 ONBOOT=no
3) edit /etc/wpa_supplicant/wpa_supplicant.conf Add output from command "wpa_passphrase <ssid> <passphrase>
4) edit /etc/rc.local, add
- wifi treatment
if [ ! -e /var/run/wpa_supplicant/wlan0 ]; then
wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0 -B
fi
5) reboot
