Tightening machine as a PLC device
From PlcWiki
(→Georges Renault :) |
(→Atlas Copco 3000 :) |
||
| Line 28: | Line 28: | ||
<pre> | <pre> | ||
| + | #include "drivers/AC3000.drv" | ||
workplace.device.tmachine_1 = yes | workplace.device.tmachine_1 = yes | ||
workplace.device.tmachine_1.driver = AC3000 | workplace.device.tmachine_1.driver = AC3000 | ||
Revision as of 12:44, 3 March 2011
The most important properties of a tightening machine defined as a PLC device are its name and channelnumber. These two entries uniquely identify a tightening machine or its spidle.
channelnumber is a logical ID of single tightening spindle connected to a PLC client. It can be any non-zero positive integer as it's only purpose is to assign the tightening tool to appropriate operation. It has no other meaning.
When a tightening machine has more than one spindle, this setting applies to the first of them. Other spindles' channelnumbers are assigned in sequential order. E.g. if this option is set to 3 and the machine has 2 spindles, then the first spindle has the channelnumber 3 and the second one has the channelnumber 4. The next usable channenumber value is 5.
.settings.channelnumber should match operation's .ChannelNumber value and the device name (i.e. tmachine_1) should match operation's .Device value.
Georges Renault :
# Georges Renault #include "drivers/GR_IXPIO_COMBO.inc" workplace.devicehub.tmachine_io_combo_1 = yes workplace.devicehub.tmachine_io_combo_1.settings.debug_mode = yes workplace.devicehub.tmachine_io_combo_1.high_level.device.tmachine_1.settings.channelnumber = 1 # Only results from given spindle are delivered workplace.devicehub.tmachine_io_combo_1.high_level.device.tmachine_1.settings.accept_spindle = 2 # Spindle reported by the tightening machine will be overridden by given value workplace.devicehub.tmachine_io_combo_1.high_level.device.tmachine_1.settings.spindle_override = 1
Atlas Copco 3000 :
#include "drivers/AC3000.drv" workplace.device.tmachine_1 = yes workplace.device.tmachine_1.driver = AC3000 workplace.device.tmachine_1.settings.tty = /dev/ttyS1 #workplace.device.tmachine_1.settings.host = 10.8.2.207 workplace.device.tmachine_1.settings.log_file = /usr/local/plc/log/ac3000_1.log workplace.device.tmachine_1.settings.debug_mode = no workplace.device.tmachine_1.settings.channelnumber = 1
